BR200 Series Ninja® Professional Blender 2.0 - FAQs

The total maximum capacity of the pitcher is 72 ounces. The maximum liquid capacity is 64 ounces. 

• Press the Power button to turn on the unit. The available programs will illuminate, and the unit will be ready for use.
• If using an Auto-iQ® program, first select the program that best suits your recipe. The preset feature will automatically stop at the end of the program. To stop the unit at any time, press the currently active button again.
• If using a manual program, select your desired speed. Once the ingredients have reached your desired consistency, press the active button again or wait 60 seconds for the unit to come to a complete stop.
• Press PULSE to pulse the motor on. Operates only when PULSE is pressed.

Press the program on the control panel. 

To stop the unit at any time, press the currently active button again.

Make super-smooth, sippable drinks and shakes in your cup, using fresh or frozen fruit, liquids, and ice.

First, start by pouring in liquid or yogurt. For thinner results or a juice-like drink, add more liquid. Second, add desired number of fresh fruits and vegetables (for best results, cut in 1-inch pieces). Third, add leafy greens and herbs (optional). Fourth, add any dry or sticky ingredients like seeds, powders, and nut butters (optional). Last, top off with ice or frozen ingredients. 

For prepping vegetables, cut both ends of ingredients and remove any outer peels or skins. Cut ingredients such as carrots, cucumber, celery, and zucchini in 2-inch pieces, and broccoli and cauliflower florets in 1-inch pieces. Cut ingredients such as onion in quarters. For prepping meat, trim excess fat and connective tissue. Cut meat in 2-inch cubes.

CO750B: Smoothie Auto-iQ® program; Low and High speeds; and Pulse can be used with the pitcher and stacked blade assembly. 

BR201AMZ: Crush Auto-iQ® program; Low, Medium, and High speeds; and Pulse can be used with the pitcher and stacked blade assembly. 

BR201CCO: Ice Crush and Smoothie Auto-iQ® programs; Low, Medium, and High speeds; and Pulse can be used with the pitcher and stacked blade assembly. 

Professional power to crush ice, break down tough ingredients, and make super-smooth smoothies and resort-style drinks.

When installing the stacked blade assembly, it will fit loosely on the drive gear. There is no audible click when it is properly installed, but it is secure.

Lower the pitcher onto the motor base. The handle should be aligned slightly to the right and the pitcher should be oriented so the LOCK symbols are visible on the motor base. Rotate the pitcher clockwise until it clicks into place. You can also install the pitcher with the handle on the left. To remove the pitcher from the motor base, turn the pitcher counterclockwise and then lift it up.

Place the lid on the pitcher. Press down on the handle until it clicks into place. Once the lid is locked in place, press the Power button to turn on the unit. The available programs will illuminate, and the unit will be ready for use. The lid must be locked in place for the unit to operate. To remove the lid, press the RELEASE button and lift the handle.

Exercising care, grasp the stacked blade assembly by the top of the shaft and place it onto the drive gear in the pitcher. Note that the stacked blade assembly will fit loosely on the drive gear. Exercise care when handling the blade assembly, as the blades are sharp. To remove the stacked blade assembly, carefully grasp it by the top of the shaft and pull straight up. Exercise care when handling the blade assembly, as the blades are sharp.

To move the motor base, grip both sides of the base and lift straight up to release the suction cups.

Place your hands underneath both sides of the motor base and gently pull the unit up and toward you.

Make sure the surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet will not stick on some surfaces such as wood, tile, and non-polished finishes. DO NOT attempt to use the unit when the motor base is stuck to a surface that is not secure (cutting board, platter, plate, etc.).

The handle will not fold down if the lid isn’t attached to the pitcher. For storage, place the lid on the pitcher and press down on the handle until it clicks in place.

Intelligent preset programs combine unique blending and pausing patterns that do the work for you. Once a preset program is selected, it will start immediately and automatically stop when blending is complete. To stop blending before the end of the program, press the currently active button again.

Manual programs are adjustable speeds for total blending control. When selected, each speed runs continuously for 60 seconds. 

This pulses the motor on and off. It operates only when PULSE is pressed. 

DO NOT process dry ingredients or perform grinding operations. 

If the unit is plugged in and powered on, but there is no container installed, the LEDs on the control panel will flash. Install a container and the available program buttons will illuminate, indicating the unit is ready for use.

Using an Auto-iQ® program is the easiest way to achieve great results. The pulses and pauses allow the ingredients to settle toward the blade assembly. If ingredients are routinely getting stuck, adding some liquid will usually help. When filling the vessel, start with liquids or yogurt, followed by fresh fruit or veggies, then leafy greens or herbs. Next add seeds, powders, or nut butters. Finally, add ice or frozen ingredients.

Smoothie bowls are thicker and spoonable, compared to smoothies, which are thinner and drinkable. Examples of thick spoonable recipes are smoothie bowls, hummus, pesto, and nut butters. Examples of drinkable recipes are smoothies, protein drinks, and green drinks. 

When selected, each speed runs continuously for 60 seconds. Press the dial again to stop the program sooner.

Hand-Washing:

Wash blade assemblies in warm, soapy water using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp. Thoroughly rinse and air-dry all parts. 

Dishwashing:

Accessories are top-rack dishwasher safe but should NOT be cleaned with a heated dry cycle. Ensure the blade assemblies are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies. 

Cleaning the Motor Base:

Turn off the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth. DO NOT use abrasive cloths, pads, or brushes to clean the base.

All parts except the motor base are top-rack dishwasher safe and should NOT be cleaned with a heated dry cycle.

For best results, use a dishwasher to remove stuck-on ingredients from accessories or wash by hand. 

To clean the accessories by adding water, rinse the container and blade assembly under warm water after blending or processing. Fill the container with warm water and add 1 or 2 small drops of dish soap. Install on the motor base and run a Manual program. When the program is complete, empty contents and rinse parts under warm water. 

For best results when chopping, cut ingredients in a uniform size and don’t overfill the vessel.

DO NOT blend hot, effervescent, or carbonated liquids. Doing so may cause excessive pressure buildup, resulting in risk of laceration and/or the user being burned.