This article contains the FAQs for the CT610 Series Ninja® Professional Blender. This supports the following product SKUs CT610, CT610C and CT611C.
-1000-Watt Base with Intuitive Touchscreen and Auto-iQ Technology -72 oz. Total Crushing Pitcher -Stacked Blade Assembly
No, there are no microwave-safe parts.
All containers are made of BPA-free Tritan plastic.
1000 watts
It has stainless steel blades.
Approximately 2.5 feet (30 inches)
It has a 1-year limited warranty.
You can buy replacement parts at ninjaaccessories.com
It has a maximum liquid capacity of 64 ounces for room temperature or cold ingredients or liquids.
It has a maximum liquid capacity of 64 ounces for room temperature or cold ingredients or liquids.
No, the Ninja Professional Touchscreen Blender is not designed for hot blending.
The Ninja Professional Touchscreen Blender comes with a 35-Recipe Inspiration Guide.
To assemble, place the Pitcher on your motor base so it forms a diamond. When you are facing the front of the blender, the Pitcher handle should be on the right side of the base or facing you for the Pitcher to sit correctly. Once the Pitcher is on the base, twist clockwise or to the left to form a square and lock the Pitcher in place. The handle will now be aligned with the front right corner or front left corner of the base.
Auto-iQ programs are pre-set with unique pulsing and pausing patterns that deliver consistent, even results with the touch of a button. Once an Auto-iQ program is selected, the blender will run automatically until the digital timer reads "0."
Use LOW, HIGH, and PULSE when you want more control over the outcome of your recipe. PULSE will operate only when the button is pressed. Touch the button quickly for short pulses. LOW and HIGH will run continuously until they are stopped.
To pause a blending cycle, press again on the same program button you initially selected. You can pause the program at any time and the digital timer will hold its countdown until the cycle is resumed. To stop a program entirely, press STOP.
Connect the motor base to a power source and the power symbol will illuminate. Once illuminated, press power.
Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer. b) Start with a few pulses and then go to a continuous blending cycle. c) For best results, use the HIGH manual setting.
The container is not installed on the motor base properly. For your safety, the unit will be able to be turned on only when the container is properly installed. Please refer to the assembly pages of the instruction manual for assistance.
- Hand-Washing: Wash containers, lids, and Stacked Blade Assembly in warm, soapy water. When washing the Stacked Blade Assembly, use a dishwashing utensil with a handle to avoid direct hand contact with the blades. Handle Stacked Blade Assembly with care to avoid contact with sharp edges. Rinse and air-dry thoroughly.
- Dishwasher: The containers, lids, and Stacked Blade Assembly are all dishwasher safe. The lid, blade assemblies are top rack dishwasher safe. Ensure the blade assembles are removed from the container before placing in the dishwasher.
Motor Base Touchscreen: Turn off the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth. Clean the touchscreen with a soft cloth, such as microfiber, to prevent scratching. To remove residue from the control panel, you may use an all-purpose cleaner. i. DO NOT use abrasive cloths/pads/brushes to clean the motor base or control panel, as they can dull or scratch the surface.
Store the unit upright with the lid on the Pitcher. b. DO NOT stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.
-1000-Watt Base with Intuitive Touchscreen and Auto-iQ Technology -72 oz. Total Crushing Pitcher -Stacked Blade Assembly
To assemble, place the Pitcher on the motor base so it forms a diamond. When you are facing the front of the blender, the Pitcher handle should be on the right side of the base or facing you for the Pitcher to sit correctly. Once the Pitcher is on the motor base, twist clockwise or to the left to form a square and lock the Pitcher in place. The handle will now be aligned with the front right corner or front left corner of the motor base
Place the lid on the container by aligning the arrow on the lid corner with the matching arrow on the Pitcher. Press down and push handle down to lock in place.
To remove the lid, press the "release" button on the top of the lid to unlock the handle. Lift up.
The touchscreen sensitivity has been optimized to promote easy and intuitive use when powered on. To prevent accidental operation, turn off the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth. Clean the touchscreen with a soft cloth, such as microfiber, to prevent scratching. To remove residue from the control panel, you may use an all-purpose cleaner. i. DO NOT use abrasive cloths/pads/brushes to clean the motor base or control panel, as they can dull or scratch the surface.
While the touchscreen is easily activated with a fingertip, it is highly recommended that you press firmly on the desired button for 1 second to ensure activation every time.